Just picked up a gently used AP410E for lab testing. I configured the 5GHz antenna to use 4x4 mode -- it was set to 2x2 by default.However, when I look at the radio status under statistics, it shows 2x2 mode. Am I misunderstanding something about how...
I have a cluster vx9000 and will adopt a AP310 remotely (L3)After adjusting the settings ip-mac conflict" and "ip-mac routing conflict, I can connect to the AP.The autoprovision rule is configured. however the AP connect to th RF-default instead con...
On my 7532 AP, running 7.7.1.9 code, the authentication-type sae-psk command (used for WPA3-Transition Mode) no longer works when fast-bss-transition is enabled. It will not allow you to commit the config and throws an error. This was working in prev...
how to know a AP is in mesh connection or not. is their any commands to show the status of mesh connection with whom it is connected?? please help.
Hello,Just after any guidance for upgrading from a relatively old version of the firmware to a more recent release. Currently we are on 5.9.4.1 and wish to upgrade to a version closer to the current release for security reasons, looking at 7.7.1.9.I...
