Resolved! Interface Configuration Empty
Hi, When I go to the Interface configuration on Connect, this appear empty, I try with several browser and always the same screen…Which can be reason??Thanks!
Forum Posts
Resolved! No DHCP address for any AP122 client
Hi everyone.I’m new to Aerohive kit, so I suspect this is a simple lack of knowledge. I have an existing site with 6 AP122’s all working fine (configured by my predecessor). I need to add a remote site. The VPN’s are in place between the sites. A...
Resolved! How to config port forward on BR200-wp?
I have a jump server behind the BR200-wp, would like to take port forward to it, such as:public IP:8022 --→ private IP:22how to accomplish it?
Resolved! AP410C PoE requirement
Hello AllThe AP410C requires 802.3at Power however if you turn off a radio ( or two radios) will it operate with 802.af PoE ?We are seeing the AP’s come up ( 802.3af) , broadcast SSID’s but then a minute later it will stop broadcasting. Am wondering ...
Resolved! XIQ - 802.1d/802h
Hi team, we are in trouble with barcode legacy devices that are unable to connect to XIQ access point 300 and 400 series.In order to work in their old platform (Aruba), they had enable the option 802.1d/802.1h but I cant find this in XIQ, Could anyo...
