ExtremeSwitching (EXOS/Switch Engine) - Page 117 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Comments in ACLs

I’m curious if theres syntax for comments in acl policy files written on EXOS switches. If I create an acl1.pol in vi, can I add comment lines here and there? Whats the character that denotes the line is a comment?I’m sure I could experiment with # ...

acl issue Protocol needs to be set to TCP or UDP, before setting "destination-port".

I’m getting this error on an exos switch when trying to refresh a policyLine 29 : Protocol needs to be set to TCP or UDP, before setting "destination-port". Here’s an example what I added.entry acl1_deny36 { if { protocol tcp; source-address 0.0.0.0/...

how to use dhcp relay agent in extreme summit x460-24t

Here are my settings for vlan 113 configure vlan vlan113 tag 113configure vlan vlan113 add ports 21-24 taggedconfigure vlan vlan113 ipaddress 172.16.113.1 255.255.255.0enable ipforwarding vlan vlan113configure vlan vlan113 dhcp-address-range 172.16.1...

How to used Policy Based in Black Diamond?

Hi Guys, My Extreme Switch is connected to Firewall and I have to different Vlans but both have same flow to the same destination. Actualy I have only one next-hop for VLAN1 but I need to add second next hop and send from source 1 next hop 1 source ...

configuring igmp proxy for particular vlan in extreme summit x460-24t

hi ,my vlan 113 setting is as followsconfigure vlan vlan113 tag 113configure vlan vlan113 add ports 21-24 taggedconfigure vlan vlan113 ipaddress 172.16.113.1 255.255.255.0enable ipforwarding vlan vlan113configure vlan vlan113 dhcp-address-range 172.1...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN