Resolved! X440-G2 Dual 10GbE Upgrade License Configuration
Hi all, I have a X440-G2 switch with Dual 10GbE Upgrade License. i want the step by step configuration on the switch to enable the ports to 10G Thank you
Forum Posts
Doubts about Openflow configuration
Good afternoon. I have two switches connecting two vlans through a trunk port and in each vlans there is a computer and the computers communicate with each other. The switches have the openflow protocol enabled and communicating with a third computer...
Resolved! Unable to set BGP Local Preference on VPNv4 routes
Hi,We're trying to our MPLS PE device to properly advertise VPNv4 routes with an appropriate local preference within iBGP-VPNv4.This is so we can influence the preferred path and PE devices the traffic traverses in our L3VPN MPLS network.We've manage...
Resolved! Radius and Local account EXOS Switch log in
I have set up our X460 G2 switches with RADIUS login through our NAC. This works well however is it possible to also have the local accounts available? XMC uses a local account to login and if the NAC were to fail local account login we be needed. ...
Resolved! FD110 credit card terminal will not link up to an EXOS 5520 switch
We have First Data FD110 credit card terminals that will not link up to an EXOS 5520 switch. On a Cisco switch they auto negotiate to 100/full. On an EXOS switch they also auto negotiate to 100/full but the device will not get a DHCP address. The ...
