ExtremeSwitching (EXOS/Switch Engine) - Page 342 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Can I configure the switch to allow specific packets with FCS errors to pass through

We are using a Summit X460-48t Network Switch between a Linux box and some custom HW. For testing purposes I would like to send some packets with a known, corrupted FCS and see the response on the custom HW. Is there a way to configure the switch t...

MLT on Exos to work with Avaya MLT/SMLT

Hello All, How do I setup LACP/LAG on EXOS G450G2 to work with SMLT on Avaya VSP/Switches? I know LACP, but I thought that MLT/SMLT is a specific type of LACP. I have two VSPs with SMLT to an EXOS X450G2 switch, how do I create an MLT on the EXOS s...

Simple device detection and policy application - straight EXOS

Good morning. I've not done a lot of policy work in EXOS except for some basic ACL's. I'm wondering if anyone has samples or guidance around detecting device types (like access points, thin clients, phones or pc"s) and automatically configuring switc...

Looping/Flooding issue + 1Gb/10Gb

Need recommendations on how to fix an issue with looping or flooding, likely due to 2 Ethernet Bridges on the same network. On a network we are currently setting up, we have a Cisco switch, 2 Extreme switches, and a Sophos UTM Ethernet Bridge (2 por...

switch dont see own S/N

Hello, all! X480-24x(10G4X).4 # sh version Switch : N/A(-11) N/A(-11) Rev 0.0 BootROM: 2.0.2.3 IMG: 16.2.2.4 Does anybody saw like that issue? What we can make before as upgrade from BootRom? Thank you!

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN