ExtremeSwitching (EXOS/Switch Engine) - Page 351 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Are there OIDs to monitor all stack nodes of a Summit stack xith X440-G2?

Hi Extreme community,I try to monitor a Summit Stack contaning 4 nodes. All nodes are X440-G2 switches. The monitoring sytem can either use SNMP or SHH CLI commands to gather informations. My problem is that I like to get informations about the statu...

Port mirror with complex filter

Have a common SMB deployment (300 users) where the firewall is at the "core" of the network, meaning that's the DFGW for LAN users, not a layer 3 VIP on the switched core. I need to mirror North/South traffic (LAN to INTERNET and vice versa) so I don...

BootROM version updation

We have X440 switch and their firmware version:15.0 so during upgradation of firmware to direct 21.0 what would be effect? a) does license will still remain or we have to install again? b) does BOOTROM upgradation required for upgradation of firmware...

Resolved! Upgrade Firmware via USB Error: Image signature cannot be validated

Trying to upgrade the firmware on a X670-G2 switch by using the USB port. I tried a couple different USB sticks, formatted FAT and FAT32. The command:show memorycardshows the flash drive is indeed present. Running the command:download image memorycar...

MLAG vs Stack what am i missing

Can't seem to wrap my head around the reason for using MLAG vs Stacking, I'm planning to use 2 x670's as a 10gigabit aggregation hub for our remote sites, but i want redundancy, so the idea was run 1 fiber to each of the x670's and run mlag so if 1 x...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN