ExtremeSwitching (Other)
Questions and discussions about switching in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! RX / TX Errors on alternate stacking ports

How can i request rx (and tx) errors on extreme (alternate) stacking port - escpecially 10Gb / 40GB ports. Standard "show port rxerrors" will not work because ports are in the Stacking mode and in currently indicated as NP (not present). "Show stacki...

M_Nees by Contributor III
  • 2409 Views
  • 6 replies
  • 0 kudos

Resolved! Dropping connection to members of a stack

I am working on building up a set of switch stacks. The stack uses an X670-G2 and 2 X460-G2 configured in a ring. The X460-G2’s are using VIM-2Q cards to support native stacking at V160. I am currently using the X670 as the master and slot 1 node in ...

Resolved! Extreme 200 connector for XIQ

Why does the 200 Series switches not have XIQ support since they are basically the same as the SRs?The two series are FastPath from Broadcom with some customizations? The 200 series has a connector for the Ezcloud solution, which could be replaced fo...

GTM-P2G8KFN