ExtremeSwitching (Other) - Page 66 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

2018-01-29: New GTAC Knowledge Articles January 21 - 27, 2018

Here are the new articles that were published January 21 - January 27, 2018 in GTAC Knowledge: Sunday, January 21, 2018: none Monday, January 22, 2018: Remote management Service Accepting Unencrypted Credentials Detected Extreme Management server n...

The "configure forwarding switching-mode cut-through" command is absent in 16.2 and 21.1.3.7

Hello, everybody,I've found an article "https://extremeportal.force.com/ExtrArticleDetail?an=000083420" where "configure forwarding switching-mode cut-through" command is mentioned. The article is for all Summits and for all EXOSes.But when I try t...

Traffic mirroring to 2 destination ports (1GE- BaseT&10GE -SR) restrictions-best practices

Hi communitywe need to mirror all incoming traffic from port A to x2 different ports (B&C). Port A is 10G-LR, port B is 1GE-baseT and port C is 10G-SR.In regards of the configuration and restrictions:Is there any configuration issue when there's a me...

Is it possible to hot swap a stacking module on a X460-G2 switch?

Is it possible to hot swap a stacking module on a X460-G2 switch?

Radius Server configuration on B3 Series Switches

Dear all, I configured a B3 Enterasys switch (with the latest firmware on it B3-661100008) for MAC authentication purpose via a RADIUS Server (Ip address 100.1.3.59). I used the following commands: set radius server 1 100.1.3.59 1812 Passwo...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN