ExtremeWireless (Identifi) - Page 12 - Extreme Networks

ExtremeWireless (Identifi)

Questions and discussions about Identifi devices

Forum Posts

Sorted by:

Start a conversation

Resolved! XCA Floorplan poor image quality

Hi, when we’re uploading good quality images into XCA / XCC as floorplan images, the Image quality in XCA is very poor. It seems that the rendering is not working well and it feels like the displayed images in a thubnail. Issue is seen in multiple...

Resolved! IdentiFi: Alcatel WLAN Phone 8158s cannot connect to WPA2-PSK SSID

Alcatel Phone 8158s (latest Firmware) cannot connect to IdentiFi SSID (WPA2-PSK). From EWC perspective session is established with all needed tings - Client (48:7a:55:1d:26:1c) also getting IP 10.10.100.99.From Client perspective no wlan session is d...

adding text comments ro floorplans in ECC

I miss the ability of putting text comments on floorplans in ECC/XCA (E2120 05.26.02.0014).In XMC I was able to enrich floorplans with additional information, such as room numbers, safety equipment, special devices. ECC has a superior AP display on f...

Resolved! Blacklisting customer after 3 RADIUS failures

HiI’m wondering if it’s possible to blacklist certain MAC address for XXX seconds after 3 RADIUS failures caused for example by no certificate or certificate expired? I want to implement those solution to avoid unnecessary EAP Request/Responses from ...

Resolved! Can Extreme Wireless (IdentiFi) be deployed as stand-alone or it really needs a controller?

We are planning to deploy just 3 units of AP3916i without controller. Is it possible that I can configure it without a physical or virtual controller? Same goes for other IdentiFi APs that requires small deployments.

Top Kudoed Authors

User

Count

20

11

10

8

5

GTM-P2G8KFN