We are currently running on Bridge at the AP and would like to move to Bridge at the Controller for one of our wireless VLANs.
I'm just looking on how to start.
Hi,
how can I see at EWC Client Report which topology (group) /VLAN a wireless client uses?
I currently use EWC 10.21.01.0065 and client report shows only EWCs role for this client. In our installation the used VLAN is decided by NACs policy mapping...
users connected to wifi via AP3705i will have their sessions dropped after every 5 to 10 minutes. the SSID still remains intact and radio is connected but sessions like ping remote-assistance email will lose connectivity.. the firmware of C25 is 9.8....
Having experienced two premature failures of C35 units, I am wondering, especially after the recent coverage of the Atom C2xxx issue, if more problems are on the way? Has extreme observed unusually high failure rates (my personal experience is a clea...
Our wireless environment consists of IdentiFi wireless version 09.21.08.0013 EWC C5210 and a mix of both 3825i and 3610i AP's. A user with a Microsoft Surface Pro 4 will not connect to an AP that is located directly outside of his office. The A...
