ExtremeWireless (WiNG) - Page 199 - Extreme Networks

ExtremeWireless (WiNG)

Questions and discussions about WiNG devices

Forum Posts

Sorted by:

Start a conversation

AP not adopted to Virtual Controller

Hi, i have two AP7522E. This firmware is AP7522E-5.9.1.3-007R. virtual controller IP is 192.168.20.12 & another AP ip is 192.168.20.10. Those are communicating one to one. but ap not adopted to vc. I checked following commands on AP & VC 1. ping 192....

Outdoor WLAN for 1.300.000 sqm. in below zero conditions

Hi experts, We are facing a challenging issue with a huge plant of an existing customer, that needs to deploy a WLAN in a really big territory with metal scrap. The area is about 1.300.000 sqm and mostly during the year the temperature is below zero ...

wing 4.x for RFS6000 series

Good day! I have a problem. It is necessary to connect the AP-5131-4006-wr access points to the RFS-6010-1000-wr controller. Wing 5.5 is installed on the controller. If I understand correctly, you need wing 4.x for the connection. Question. Maybe so...

RFS6000 SNMP OID for Area/Build does not work

I downloaded WiNG-MIB and I was able to locate many OIDs I was looking for, but the OID "1.3.6.1.4.1.388.50.1.3.18.1.1.4" or "1.3.6.1.4.1.388.50.1.3.34.1.1.4" should display the Area / Build information of the controller or AP does not work. I alread...

Second user connection on SSID fail. AP7522 +VX9000

Hi all, I have a VX9000 + AP7522 and everything was looking good, AP is being adopted by controller normally and broadcasting the SSID. What is happening is when first device connect to the SSID, it is working fine. Device is getting IP address by ...

Top Kudoed Authors

User

Count

21

11

10

10

10

GTM-P2G8KFN