Hello All,I have problem setting power for AP621, AP 6521. The power in VX9000 is fixed to 14dBm, whatever i do. So I set manually power to value 19dBm (override Smart-RF), but nothing changed. I can see in Statistics → Radios → Status in Column Powe...
We have an existing RFS4000 with 24 x AP7532 APs, all running 5.8.6.0 firmware.The AP7532s are end of purchase, so we're going to procure some Extreme AP310 APs and add them later.Along with the new APs we're going to replace the RFS4000 with an NX55...
Hi,I need to open up the firewall for a new WiNG setup and was wondering which protocol the controller use to push AP firmware. Does it use FTP, https or the Mint protocol? Thanks,
We are using Mac authentication. on switch ERS4800AP is authenticating though NAC, gets the vlans on its ports by Fabric Attach.The send back vlan which has to be untagged is untagged and all the others are tagged.Still getting the ip 192.168.1.20. ...
Hi youI use controller RFS4000 and 10 AP 7161 and 6 AP 7562. When I turn on Smart RF it seems Wifi Network is worse.Should I manually set transmit power for each AP?
