Network Architecture & Design - Page 78 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

New APs and poor load balancing

We are a school, with two C25 controllers (I'll call them A and  serving about 45 3705i APs, deployed about one per 2 or 3 classrooms. All classrooms get decent signal strength (-50 to 60 dBm or higher), usually from multiple APs -- but we are incre...

C2G124-48 - In Boot Menu Stuck - NEED Xcode.bin because the complete flash memory is wiped bymistake

I have C2G124-48 Entrasys Switch. Bymistakenly we have deleted the boot code and cause of that - i lost bootcode, firmware and the configuration - i do have the firmware and configuration but i dont have the boot code - after lots of research - i und...

How does ELRP Works?

I am Working as a Technical Assistant in out Institution. Also, I am doing M.S. in Computer Networks Area. We have more than 120 Extreme Switches in our Network. We are using ELRP to detect the Loop in our Network. Let me know How the ELRP Works? ...

Enterasys C5K125-48 switches firmware update

Greetings, We are using Enterasys C5K125-48 switches on our Network and we wish to update the firmware. Kindly assist with documentation for the step by step instructions on how to update firmware. Please email: . Thanks, Kombe

NAT Error "Global IP addresses exhausted for pool"

We have implemented a SSA 150 as a central core device in our Network. We have a full Public Class C Network but have only defined 10 NAT Pools with one Public IP for every pool. The pools are for different VLAN ́s and worker Groups .. Employments ...

Top Kudoed Authors

User

Count

4

3

3

3

2

GTM-P2G8KFN