Extreme Networks

RobertD1

Hello,Customer needs guidance on how to configure Cisco ISE to send AVP back to XIQ Site Engine to allow TACACS login.We understand the following from the KB article:Q A: HOW TO Configure TACACS+ Authentication In Extreme Management Center or Extreme...

RobertD1 · 02-10-2025

Hello,I understand that the AP510-C-WW is a World Wide SKU and that the country code should be determined during onboarding, and this is automatic as long as there are no NTP or FW issues.Egypt does not allow the use of most of UNII-2 Extended (range...

RobertD1 · 01-30-2025

Hello,I have a customer that wishes to onboard XIQ-SE to Cloud IQ via a proxy server. During installation there is the option to click Advanced and enter proxy information. Is the VIQ ID the CUID or the VIQ Name?Where does the One Time Password come ...

RobertD1 · 12-16-2024

Hello,We have an X435 switch that is daisy chained to another switch and then onwards to the internet via a local site WAN router.The second switch was connected to Cloud IQ but has become disconnected. The first switch is still connected. On the sec...

RobertD1 · 08-31-2024

Hello,What is the best practice for updating an AP to change the band from 5Ghz to 2.4Ghz and add a new SSID via the Network Policy? Can this be done with just a delta update avoiding having to reset the AP or is it best to do a Complete update. Ther...

RobertD1

Solution: VOSS : LACP port(s) operationally disabled with log "LACP operationally disabled on port <#> because the port's capability doesn't match key <#>'s capability" | Extreme Portal

RobertD1

Got it to work by specifying AVP in a Custom Attribute for a shell profile (with no commands). Two phases. User was authenticated and then authorised for service group.

RobertD1

Thanks Robert. It is absolutely an issue on the Cisco ISE but we have a customer that is moving from Cisco to Extreme and is unfamiliar with XIQ SE. I was reaching out to see if anyone had experience of doing this that could shed some light. Thanks f...

RobertD1 · 02-20-2025

Results: XIQ-SE User: rootXIQ-SE User Domain:CLI Login: adminEXOS-VM 192.168.0.26 02/20/2025 06:46:38 PM at 06:46:38 PM* EXOS-VM.1 # enable cli scripting* EXOS-VM.2 #* EXOS-VM.2 # show vlanUntagged ports auto-move: Inform-----------------------------...

RobertD1 · 02-20-2025

Hi Walt,I spun your TCL script through Chat GPT a few times and it came back with a version that does search VLANs for BMS. If exist it returns 1. If I delete the VLAN it returns 0.* EXOS-VM.12 # show vlanUntagged ports auto-move: Inform-------------...

Extreme Networks

User Statistics

User Activity

Login via TACACS not working with Cisco ISE

Regulatory information for AP510-C-WW for Egypt

Onboarding XIQ-SE via a proxy server

Upgrading X435 switch remotely

Delta versus Complete Updates

Re: LACP Key Mismatch Issue Between Extreme 7520 VOSS and HPE 8360 VSX Switches

Re: Login via TACACS not working with Cisco ISE

Re: Login via TACACS not working with Cisco ISE

Re: Cannot echo a cli variable "VLAN" in XIQ script

Re: Cannot echo a cli variable "VLAN" in XIQ script