ExtremeWireless (WiNG) - Page 11 - Extreme Networks

ExtremeWireless (WiNG)

Questions and discussions about WiNG devices

Forum Posts

Sorted by:

Start a conversation

Resolved! Signal disconnected and unable to connect

AC : NX7500 version 7.5.1.6-001R1. The APs emitted several signals, including the W1 signal(802.1X authentication). Yesterday, the terminals connected to the W1 signal was disconnected at 17:00 and could not connect to the W1 signal. The other signal...

Resolved! Unadopted AP

Hello everyone!AP not into in controller vx9000AP model: ap7532Problem: Vx9000#show adoption log adopter2024-01-03 21:31:15:Sending MLCP Offer to 75.03.18.C0 (link_level=2, preferred=0, capacity=25567)2024-01-03 21:31:15:Adopted 74-67-F7-03-18-C0 (7...

Wired ports AP302w

Hello, Apologize for the noob question, but thought I'd ask anyway. Currently have an ap302 joined to our Extreme Campus Controller running E2120 05.46.08.0004. I'd like to configure the wired ports to bridge traffic at the AP onto the switchport wit...

'Adoption failed': Connection error 145

Hello,I have VX9000E and about 40 AP6521 connected to it. After changing switches to Aruba I have an issue with adoption this AP by controller.AP has IP link with controller but is not adopting. It happend only on few AP, most of AP are adopted. For ...

AP7632 connection problem

Hello!Dear experts, i need your kindly advice, please.. I have an AP7632i access point, which operates in a bridge mode. It looks like AP works fine, but some kinds of clients can't receive an IP address from the gateway through this AP. As a result,...

Top Kudoed Authors

User

Count

25

15

11

10

10

GTM-P2G8KFN