Hi Community,After connecting the ML-2452-APA2-02 antenna to AP460e, the parameters are shown at the below image, it seem the AP460e does not recognize the ML-2452-APA2-02 antenna, isn't it? And the current Tx power for 5G is very low (11dbm) , whi...
Hi,Couple days ago we had our site with AP310Es surveyed. The suggestion that came up after is, that we should increase our Tx management rate to 24Mbit/s. Can you please point me where I can find it in the WiNG controller? I can't locate it anywhere...
Hi, An AP-310e was purchased and successfully configured. A wireless mobile scanner could print to a wireless printer through the AP, however, after 24 hours, the scanner and printer appeared to be disconnected from the AP. Repeated tests had the sam...
Hello!Dear experts, please, kindly help me with my AP7632i configuration issue..I'm administering a small network and our CORE firewall/router is a Juniper SRX 210H, which acts as DHCP server.As a wi-fi AP we use WiNG AP7632i access point in local br...
HelloI need to know if it's possible to configure AP510I-WR as standalone AP mode to using for surveying with Ekahau.We could place in the room without any network connection and measure with Ekahau the real RF emission in rooms for 2,4 and 5GHz.Than...
