Hi,When I login to the vx9000 with the web interface, it generates a syslog message with source ip 0.0.0.0 instead of the actual users address. When I login using the old wing manager, the message does contain the source address of the user.This is t...
Hi,I know that the RFS4000 controllers are very old, but we still have some locations where we use it.We have two RFS4000 controller in an Cluster running up more that 5 years. A few days before I had to configure an accesspoint and thought it would ...
I have Extreme AP410e device . Wireless 5G SSID is not avalable even after adding to Radio2 5Ghz RF mode. Can anybody help . Config is below.! Configuration of AP410 version 7.5.1.2-008R!!version 2.7!!client-identity-group defaultload default-fingerp...
I have three AP6521 (1 controller+ 2 adopted AP`s). After upgrade from Wing 5.4 to 5.6 wireless speed down to 80-100 mbps. Before upgrade speeds was 200-280 mbps. AP's works in 5Ghz mode.
AC : NX7500 version 7.5.1.6-001R1. The APs emitted several signals, including the W1 signal(802.1X authentication). Yesterday, the terminals connected to the W1 signal was disconnected at 17:00 and could not connect to the W1 signal. The other signal...
