Extreme Networks

adf10

Hello community,I have an RFS4000 working as the main router/gateway for internet access on a small subnet with the NAT properly configured and operational. We have in place some port forwards to a web server and IP Cameras however, I would like to ...

adf10 · 12-22-2023

I have an AP410C-1-FCC, Console port is a micro USB port. When trying to connect to Windows it reports Unknown USB Device (Device Descriptor Request Failed). I did try with different USB ports, and diferent computer always with the same result. Her...

adf10 · 12-15-2023

Hello Community,I have a group of AP410i deployed on an office building, with Radio1 configured on 2.4Gz , Radio2 on 5Ghz and Radio3 enabled and configured as sensor. Some APs reports Radio3 in State OFF like this:But some of the APs reports Radio3 a...

adf10 · 12-15-2023

Hello community,I'm trying to configure AP410i to disconnect clients that falls below -75db, but in wireless configuration I cannot find any settings related to minimum signal strength, signal threshold or similar.Can anybody point me in the correct ...

adf10 · 04-21-2023

I have an AP7532 which does not boot, connecting with the console it reports Error message: Wrong Image Format for bootm command", "ERROR: can't get kernel image!" as you can see here:ErrorI've waited or max failed attempts but it does not happen. ...

adf10

Hello Daren, Thank you very much for your help and pointing me to the NAT how-to guide. However, this guide only describe how to configure NAT translation for outgoing connections (in order to share the internet access among the local subnet) and th...

adf10 · 12-24-2023

Thank you very much for your help Robert, it's greatly appreciated.Best Regards,- Alex

adf10 · 12-18-2023

Hello Jan,Thanks to your help I was able to find the command on the CLI manual to fiddle with this.I'll do my test to find my optimal values.Thank you,- Alex

adf10 · 12-18-2023

Hello Robert,Thank you for your help. Here is my smart-rf-policy configuration:smart-rf-policy defaultassignable-power 5GHz max 20assignable-power 5GHz min 10assignable-power 2.4GHz max 20assignable-power 2.4GHz min 10channel-list 5GHz 36,40,44,52,56...

adf10 · 04-25-2023

Thank you for your suggestion, I've been trying to do as you mention, however Image is downloaded but not booted. I'm using bootp which acording to help can boot a downloaded image from tftp , I also used tftpboot with the same result. Do you know...

Extreme Networks

User Statistics

User Activity

How to configure loopback nat (hairpin nat) in a RFS4000 working as the subnet gatewayy

AP410C-1 probem connecting to console port

AP410 Radio 3 sensor

Disconnect clients based on their signal Strength

Wrong Image Format for bootm command, ERROR: can't get kernel image!

Re: How to configure loopback nat (hairpin nat) in a RFS4000 working as the subnet gatewayy

Re: AP410C-1 probem connecting to console port

Re: Disconnect clients based on their signal Strength

Re: AP410 Radio 3 sensor

Re: Wrong Image Format for bootm command, ERROR: can't get kernel image!