Guest Splash Page When Bridged @AP
Is there any way to redirect users to a splash page when the network is bridged at the access point and not the controller?
Is there any way to redirect users to a splash page when the network is bridged at the access point and not the controller?
I use from c5210 and ap3825i and ap3865e then apple device disconnect intermittent from accesspoint. please help me to solve this problemm
Yesterday I had a complaint that a few clients at a remote office were having poor response times. Their ping response time was around 100-400ms, whereas it's usually it's less than 6ms. I could not see any indication that the bandwidth between their...
Hello, all! Have an AP3805i. Install guide say that power LED can be red or green But in my AP3805i only power LED is yellow and steady Any ideas? Thank you!
We are using 3935i APs They are connected to only one port : I saw the LOW mode in the log We would like to use it with performance: we have to use TWO ethernet ports Is it possible with only one POE switch X440-48P Thanks
User | Count |
---|---|
20 | |
11 | |
10 | |
8 | |
5 |