Resolved! AP305C-1 centralized mode - command line interface
HiI have an AP305C-1 Release 7.1.2 (wing) run as centralized mode.Where i can find cli guide?Thank you
Forum Posts
How can client roam faster between two wireless bridge APs（AP310e）
I have 3 clients and 4 bridge APs。 wireless bridge config.When client roam from one AP to another. it(lost connection and connect new one) cost about 6-10 seconds.How can I shorten roaming time bridgeRootprofile ap310-1 310bridgeRootno autoinstall co...
Resolved! Information in WiNG GUI not correct
In de GUI there are 89 2.4Ghz clients. However the number of 2.4Ghz radio;s is 0.how can this correct?
Resolved! NAC X CONTROLER VE6120 Medium 10.4 X ap305c
Hello all,I have a NAC system that work around my LAN.Then I have a WIFI system (VE6120 Medium 10.04) on the same LANI've deploy some AP's to distant branch, on one site is all ok, while the other is not despite they have the same configuration.For t...
AP410E Wing 7.7.1.10 4x4 Mode
Just picked up a gently used AP410E for lab testing. I configured the 5GHz antenna to use 4x4 mode -- it was set to 2x2 by default.However, when I look at the radio status under statistics, it shows 2x2 mode. Am I misunderstanding something about how...
